GODZILLA
(Godzilla)
TECHNICAL SPECIFICATIONS
-Attachs onto machine legs with stock bolts. Magnetic building covers bolts.
-Printed in PLA+ for either left or right side of game.
-Hand painted with acrylic paints and gloss coated
-Cuphole diameter = 3.14” - fits slim cans or normal sized cans.
-Length from leg to end = ~7”, designed to fit in a bank of pins. Does not touch cabinet
(Mecha Godzilla)
TECHNICAL SPECIFICATIONS
-Attachs onto machine legs with stock bolts. Magnetic belly covers bolts.
-Printed in PLA+ for either left or right side of game.
-Hand painted with acrylic paints and gloss coated
-Cuphole diameter = 3” - fits slim cans or normal sized cans.
-Length from leg to end = ~5.5”, designed to fit in a bank of pins. Does not touch cabinet
Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.
The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.
Protect your beverage from godzilla with the mechagodzilla pin-chalice
TECHNICAL SPECIFICATIONS
-Attachs onto machine legs with stock bolts. Magnetic mechagodzilla torso covers bolts.
-Printed in PLA+ for either left or right side of game.
-Hand painted with acrylic paints and gloss coated
-Cuphole diameter = 3” - fits slim cans or normal sized cans.
-Length from leg to end = ~5.5”, designed to fit in a bank of pins. Does not touch cabinet
-Physical pinball in belly
Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.
The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.
“Oh no, there goes Tokyo
Go go Godzilla, yeah”
TECHNICAL SPECIFICATIONS
-Attachs onto machine legs with stock bolts. Magnetic building covers bolts.
-Printed in PLA+ for either left or right side of game.
-Hand painted with acrylic paints and gloss coated
-Cuphole diameter = 3.14” - fits slim cans or normal sized cans.
-Length from leg to end = ~7”, designed to fit in a bank of pins. Does not touch cabinet
Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.
The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.
THE BIG LEBOWSKI
“ Hey, hey, careful man, there's a beverage here. “
TECHNICAL SPECIFICATIONS
-Attachs onto machine legs with stock bolts. Magnetic bowlingball covers bolts.
-Printed in PLA+ for either left or right side of game.
-Hand painted with acrylic paints and gloss coated
-Cuphole diameter = 3.1” - fits slim cans or normal sized cans.
-Length from leg to end = ~6.75”, designed to fit in a bank of pins. Does not touch cabinet
COLOR VERSION COMING JUNE 2026
Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.
The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.