PACK A LIP N PACK A MAG

Bring functional art to your machine with the King Kong Pin-Chalice. A luxury pinball cupholder designed to complement the larger-than-life atmosphere of your game. Uniquely designed, 3D printed, and hand-painted, this Pin-Chalice transforms an ordinary cupholder into a detailed display piece worthy of the Eighth Wonder of the World.

Featuring a King Kong-inspired design that blends seamlessly with the adventure and spectacle of the machine, the Pin-Chalice adds character without sacrificing function. Built to securely hold your drink while looking like it belongs on the game from the factory.

TECHNICAL SPECIFICATIONS

-Attaches onto machine legs with stock bolts. Magnetic building covers leg bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3.1” - fits slim cans or normal sized cans.

-Length from leg to end = ~6.5”, designed to fit in a bank of pins. Does not touch cabinet

-Physical pinball on top of building

PIN-CHALICE DISCLAIMER

Pin-Chalices are durable, 3D-printed and hand-painted products designed to securely hold beverages, but should still be treated with the same care and respect as your pinball machine. Each Pin-Chalice is hand-painted with acrylic paint and finished with a protective gloss or matte clear coat. As with any hand-painted product, scratching, impacts, harsh cleaners, or excessive wear may damage the finish.

Buyer is responsible for mounting the Pin-Chalice to their machine and assumes all risk associated with installation. A pinball dolly is recommended for easier installation. Run both mounting bolts through the Pin-Chalice and tighten them slowly and evenly until the Pin-Chalice sits firmly against the game. Do not overtighten.

“Am I the only one around here who gives a damn about cupholders?”

The Walter PIN-CHALICE is a premium pinball cupholder inspired by everybody's favorite rule-enforcing bowler from The Big Lebowski. Designed for fans of the film, collectors, and pinball enthusiasts alike, this handcrafted accessory brings Walter's larger-than-life personality to your machine.

Featuring custom sculpted details inspired by the movie's unforgettable characters and bowling alley atmosphere, the Walter PIN-CHALICE transforms an ordinary cupholder into a functional display piece. Whether you're league bowling, playing pinball, or just making sure nobody steps over the line, this cupholder is built to keep your drink close at hand.

Each PIN-CHALICE is individually 3D printed and hand-painted, making every piece unique. Designed to securely hold your beverage while complementing the style and humor of your machine, it blends collectible-quality craftsmanship with everyday functionality.

"Because this isn't Vietnam. This is pinball. There are rules."

TECHNICAL SPECIFICATIONS (WALTER)

-Attaches onto machine legs with stock bolts. Magnetic bowlingball covers bolts.

-Printed in PLA+ for either left or right side of game.

-Chrome metallic finish

-Cuphole diameter = 3.04” - fits slim cans or normal sized cans.

-Length from leg to end = ~7.1”, designed to fit in a bank of pins. Does not touch cabinet

The Big Lebowski PIN-CHALICE really ties the machine together. Inspired by the laid-back style, bowling culture, and unforgettable personality of The Dude himself, this premium pinball cupholder is designed for fans of The Big Lebowski and collectors who appreciate functional art with character.

Featuring custom sculpted details inspired by the film’s iconic atmosphere, the Big Lebowski PIN-CHALICE brings a relaxed retro vibe to your machine while securely holding your beverage during gameplay. Whether you’re enjoying a White Russian or just abiding, this handcrafted accessory was made to feel right at home beside your pinball machine.

Each PIN-CHALICE is individually 3D printed and hand-painted, giving every piece its own unique finish and personality. Designed to complement the style and humor of the game, it serves as both a functional cupholder and a collectible conversation piece.

“Yeah, well, you know, that’s just like… your opinion, man.”

TECHNICAL SPECIFICATIONS (THE DUDE)

-Attaches onto machine legs with stock bolts. Magnetic bowlingball covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3.1” - fits slim cans or normal sized cans.

-Length from leg to end = ~6.75”, designed to fit in a bank of pins. Does not touch cabinet

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

“Am I the only one around here who gives a damn about cupholders?”

The Walter PIN-CHALICE is a premium pinball cupholder inspired by everybody's favorite rule-enforcing bowler from The Big Lebowski. Designed for fans of the film, collectors, and pinball enthusiasts alike, this handcrafted accessory brings Walter's larger-than-life personality to your machine.

Featuring custom sculpted details inspired by the movie's unforgettable characters and bowling alley atmosphere, the Walter PIN-CHALICE transforms an ordinary cupholder into a functional display piece. Whether you're league bowling, playing pinball, or just making sure nobody steps over the line, this cupholder is built to keep your drink close at hand.

Each PIN-CHALICE is individually 3D printed and hand-painted, making every piece unique. Designed to securely hold your beverage while complementing the style and humor of your machine, it blends collectible-quality craftsmanship with everyday functionality.

"Because this isn't Vietnam. This is pinball. There are rules."

TECHNICAL SPECIFICATIONS

-Attaches onto machine legs with stock bolts. Magnetic bowlingball covers bolts.

-Printed in PLA+ for either left or right side of game.

-Chrome metallic finish

-Cuphole diameter = 3.04” - fits slim cans or normal sized cans.

-Length from leg to end = ~7.1”, designed to fit in a bank of pins. Does not touch cabinet

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

“ Hey, hey, careful man, there's a beverage here. “

TECHNICAL SPECIFICATIONS

-Attachs onto machine legs with stock bolts. Magnetic bowlingball covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3.1” - fits slim cans or normal sized cans.

-Length from leg to end = ~6.75”, designed to fit in a bank of pins. Does not touch cabinet

COLOR VERSION COMING JUNE 2026

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

(Godzilla)

TECHNICAL SPECIFICATIONS

-Attachs onto machine legs with stock bolts. Magnetic building covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3.14” - fits slim cans or normal sized cans.

-Length from leg to end = ~7”, designed to fit in a bank of pins. Does not touch cabinet

(Mecha Godzilla)

TECHNICAL SPECIFICATIONS

-Attachs onto machine legs with stock bolts. Magnetic belly covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3” - fits slim cans or normal sized cans.

-Length from leg to end = ~5.5”, designed to fit in a bank of pins. Does not touch cabinet

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

Protect your beverage from godzilla with the mechagodzilla pin-chalice

TECHNICAL SPECIFICATIONS

-Attachs onto machine legs with stock bolts. Magnetic mechagodzilla torso covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3” - fits slim cans or normal sized cans.

-Length from leg to end = ~5.5”, designed to fit in a bank of pins. Does not touch cabinet

-Physical pinball in belly

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

“Oh no, there goes Tokyo
Go go Godzilla, yeah”

TECHNICAL SPECIFICATIONS

-Attachs onto machine legs with stock bolts. Magnetic building covers bolts.

-Printed in PLA+ for either left or right side of game.

-Hand painted with acrylic paints and gloss coated

-Cuphole diameter = 3.14” - fits slim cans or normal sized cans.

-Length from leg to end = ~7”, designed to fit in a bank of pins. Does not touch cabinet

Disclaimer:
These Pin-Chalices are 3D printed products designed to be durable and to hold beverages; however, they should still be handled with the same care and respect as pinball machines themselves. The finish uses acrylic paint with either a gloss or matte topcoat; while durable under normal use, it may wear over time if subjected to abrasion, impact, or harsh cleaning agents.

The buyer is responsible for installing and mounting the product on their machine at their own risk. A pinball dolly is recommended during installation. When installing, run both bolts through the cupholder and tighten slowly and evenly until the Pin-Chalice is firmly seated against the game.

Pick out 3 Designs via form

Choice of 4 ZYNGRZ

One SMOKING KILLS

One ZYNGRZ

One HIGH VELOCITY / GRAINZZLY

1/8 Random drawing between styles.

You will receive one of the following : ( Calbro , Calbro light , Spirit of America , Soviet Spirit , Flannel Camels , Unlucky Strike , Pewport , Winchester )

1.48”x2.44” Vinyl printed stickers